Taper Lock Weld On Hub

Part Number Example:WHTL 2517BSW

WHTL = Weld-on-Hub for Taper Bushing

2517 = 2517 Taper Lock Bushing

BSW = British Standard Witworth Set Screws

ANSI = American Standard UNC Set Screws

Note BSW Adaptor bores are prepared for BSW (British Standard Whitworth thread) used in Europe, and are not interchangeable with 1/2-13 UNC inch ANSI (American) threads.

Only bushing sizes 2517BSW, 3525BSW and 3535BSW use 1/2-12 BSW inch non-interchangeable BSW threads.

PDF Taper Lock Bushings Adapters and Hubs.pdf

Products below.